Detached breakwaters’ effects on a microtidal Mediterranean Coast, case of the Hammam-Lif littoral (North-East of Tunisia)

The Hammam Lif shoreline, which is part of the Gulf of Tunis (North-East of Tunisia), suffered from a dramatic erosion event during a storm in 1981. Therefore, eight successive and detached breakwaters were built to protect it. The effect of these protection works on the evolution of this coastline is assessed using aerial photographs geo-referenced by digital photogrammetric methods. Results show that a general accretion has developed behind the detached breakwaters, with the formation of seven tombolos and one salient. The response of the coastline depends on the characteristics of the protective works (length, distance to coast, and spacing). Detached breakwaters which are short, far from the coastline and distant from each other, give rise to very small tombolos or salients. On the other hand, longer breakwaters which are near the coastline and closely spaced, give rise to more developed tombolos, showing that these structures are the most efficient.     

Reducing ammonia emission by aluminum sulfate addition in litter and its influence on productive,reproductive, and physiological parameters of dual-purpose breeding hens

Environmental Science and Pollution Research - This research investigated the impact of aluminum sulfate (AS) as amendment to different types of litter (new, reused, and mixed litters) for reducing...     

Elemental analysis of total suspended particulate matter in the ambient air of Baghdad

Samples of atmospheric particulate matter obtained from representative areas of the city of Baghdad were collected on glass fiber filters using a high-volume sampler. Atomic absorption techniques were used to analyze the total suspended particulates (TSP) for the following trace metals; Fe, Cu, Zn, Pb, Mn, Cr, Cd, Co, and Hg. Sulfates were measured by turbidemetric method. Ion-selective electrodes was used for chloride analysis. It is concluded that the major components of TSP in the ambient air of Baghdad consist of mineral dust. Pb and Cd gave high enrichment factor values, which implies enrichment of these two metals from anthropogenic sources. High enrichment factors were also obtained for Zn and Cu. It is also concluded that in this arid area, the black smoke reflectance method is not suitable for measuring total suspended matter gravimetrically.     

Probiotics for dietary management of non-alcoholic fatty liver disease

Environmental Chemistry Letters - Non-alcoholic fatty liver disease (NAFLD) is characterized by an increase in fat content of liver cells, which is independent from alcohol intake. Here, we review...     

ESTIMATION OF RECHARGE FROM A RESERVOIR USING TWO WATER BUDGET MODELS1

ABSTRACT: Reservoir water levels, observation well data, and meteorological parameters were collected at a recharge dam site in Central Saudi Arabia. This data, along with other information on the reservoir and the underlying aquifer, were used to estimate the amounts of recharge through the reservoir bed by applying two water budget models. The first is a water budget model for the reservoir only, while the second is for an aquifer reach extending upstream and downstream from the reservoir. The results of the two approaches were discussed and compared.     

Adsorption and thermodynamic parameters of chlorantraniliprole and dinotefuran on clay loam soil with difference in particle size and pH

The behavior of chlorantraniliprole (CAP) and dinotefuran (DNF) insecticides was investigated in clay loam soil, a common type of the Egyptian soil. Effect of temperature, pH and particle size of the soil on the adsorption process was studied. Adsorption isotherm by bulk soil and its constituents; humic acid (HA), clay, silt and sand fractions was measured using batch equilibration technique. The results showed that the adsorption of the insecticides tested was significantly affected by the temperature and was a spontaneous interfacial process in the soil. Freundlich model accurately predicted the adsorption behavior of both insecticides. The interaction between soil and insecticides was endothermic and the highest adsorption for CAP and DNF was obtained at pH 9. However, the effect of pH on the adsorption of DNF was lower than that of CAP. Sorption of CAP and DNF on HA fraction was significantly greater than on clay fraction and bulk soil. In addition, the adsorption was significantly increased with particle size decrease. It could be inferred that the adsorption of CAP and DNF on clay loam soil was physical in nature and greatly influenced by the soil components, pH and temperature.     

Super effective Zn-Fe-doped TiO2 nanofibers as photocatalyst for ammonia borane hydrolysis

In this study, the photocatalytic activity of TiO₂ nanofibers toward ammonia borane hydrolysis has been strongly modified by doping the nanostructure by ZnO and Fe₂O₃ oxides. Due to the differences in the work function and band gap energy among the three semiconductors (TiO₂, ZnO and Fe₂O₃), illumination of TiO₂ leads to accumulate the electrons and holes on the conduction and valance bands of Fe₂O₃ and ZnO, respectively. Accordingly, the experimental results indicated that the surface of the obtained nanofibers is very active which results in an instant hydrolysis of ammonia borane molecules reaching the active zone surrounding the nanofibers. Moreover, negative activation energy was determined as increasing the temperature led to decrease the photocatalytic performance. Furthermore, kinetic studies indicated that the heterogeneous catalytic reaction describing the ammonia borane hydrolysis process is zero order which additionally supports the super activity of the introduced nanofibers. It was also observed that Fe₂O₃ content in the introduced nanofibers has distinct influence as the best performance was obtained at 1 wt%. The modified TiO₂ nanofibers were prepared by calcination of electrospun nanofibers composed of titanium isopropoxide, zinc acetate and iron acetate in air at 700 °C for 1 h. Overall, the present study opens a new avenue to overcome the fast electrons/holes recombination dilemma facing TiO₂-based nanostructures.     

Mechanical,Morphological and Dynamic Mechanical Analysis of Pineapple Leaf/Washingtonia Trunk Fibres Based Biophenolic Hybrid Composites

In this article, flexural, impact and dynamic mechanical properties of the Pineapple leaf fibres (PALF) and Washingtonia trunk fibres (GW) based bio-phenolic hybrid composites were examined. The pure and hybrid composites were fabricated using the hand lay-up technique with an overall fibre weight ratio of 50% in which GW and PALF were maintained in the fibre weight ratios of 50:50, 30:70, and 70:30 denoted as 1G1P, 3G7P, and 7G3P, respectively. Hybrid composites displayed better flexural strength, flexural modulus and impact strength than the GW composites and better viscoelastic properties than the PALF composites. Results revealed that 1G1P hybrid composites exhibited 25% and 12% improvements in flexural strength and modulus compared to the GW composites. 3P7K composites showed a twofold increase in impact strength than GW composites. The storage modulus of the pure and hybrid composites declined rapidly beyond the glass transition temperature. Furthermore, it was observed that the values of storage modulus for all the composites at 150 °C were similar regardless of the composite configuration. The Peak of loss modulus was found to increase in the following order: GW?>?7G3P?>?3G7P?>?1G1P?>?PALF. Furthermore, the temperature at the peak tan delta was improved, and a reduction in the tan delta peak was observed for hybrid composites compared to the pure composites. Finally, the PALF and GW hybrid combinations can be suitable for use in various applications such as textiles, machinery part production industries, medicine, automobiles, etc.

     

Therapeutic potential of dopamine agonists in the treatment of type 2 diabetes mellitus

Environmental Science and Pollution Research - Diabetes is a global health concern that has affected almost 415 million people globally. Bromocriptine is a dopamine D2 agonist, which is a Food and...     

New Methods for the Preparation Nanosized Metal Coordination Polymers

Transition-metal coordination polymers [M(ndc)(bpy)·(H₂O)m]·xH₂O (where M = Co(II), Ni(II), Cu(II) and Zn(II), ndc = 1,4-naphthalenedicarboxylate, bpy = 4,4′-bipyridine; m = 0 or 1; x = 1 or 2) were prepared by reacting the ligands and metal ions at room temperature with the aid of microwave irradiation and sonication methods. The structure of the coordination polymers was assigned based on elemental analysis, FT-IR and electronic spectral studies, thermal analysis, scanning electron microscope and X-ray powder diffraction. Thermogravimetric analysis was also used to follow up the possible thermal decomposition steps and to calculate the thermodynamic parameters of the nano-sized metal complexes. The kinetic parameters were calculated making use of the Coats–Redfern and Horowitz–Metzger equations. All obtained results of the different technics used in our study stated the ability to synthesis the metal coordination polymers of our interest using both microwave irradiation and sonication methods.